Tired of getting tangled up in a web of wires every time you want to listen to music on your iPhone? Among the top contenders in the market are Soundcore headphones, known for their impressive sound quality and user-friendly features. If you’re an iPhone user and have recently acquired Soundcore headphones, you might be wondering how to connect them seamlessly to your device.
In this guide, the HeadPhones Baba team will show you just how easy it is to connect your Soundcore headphones to an iPhone using Bluetooth. Get ready for an unrivaled audio experience that sets you free from the shackles of tangled cords!
Top 3 Soundcore Headphone DEALs
Preparing Your Soundcore Headphones for Pairing
Before you can connect your Soundcore headphones to your iPhone, you need to make sure the headphones are ready to be paired and connected. Follow these steps:
1. Charge Your Headphones
Make sure your Soundcore headphones have enough battery charge. A low battery can cause issues with pairing and connectivity. Fully charge your headphones before trying to connect to your iPhone.
2. Turn on Bluetooth on Your Headphones
Most Soundcore headphones have a power button that also controls Bluetooth. Press and hold the power button for 2-3 seconds until you hear a voice prompt or see indicator lights that show Bluetooth is activated. Consult your headphone manual if you’re unsure about this step.
3. Put Your Headphones in Pairing Mode
Once Bluetooth is activated on your headphones, you need to make the headphones discoverable for pairing Soundcore P3. Press and hold the power button for 5+ seconds until you hear an audio cue that pairing mode is on. The LED lights may also flash indicating pairing mode.
Now your Soundcore headphones are ready to connect with your iPhone.
How to Connect Soundcore Headphones to an iPhone?
Connecting your Soundcore headphones to an iPhone only takes a few minutes. Follow these steps:
1. Enable Bluetooth on Your iPhone
Open your iPhone Settings > Bluetooth and toggle Bluetooth on. Make sure Bluetooth is activated before trying to connect your headphones.
2. Select Your Headphones from the List of Available Devices
With your headphones in pairing mode, open your iPhone Settings > Bluetooth again. Your Soundcore headphones name should appear in the list of Available Devices (for example, “Soundcore Life Q30“).
Tap on your headphones name in the Available Devices list to initiate pairing.
3. Confirm Pairing on Both Devices
Your iPhone will pair and connect to your Soundcore best headphones automatically. You may hear an audio confirmation on your headphones when pairing is successful.
On your iPhone, paired headphones will show in the MY Devices list with a Connected status. Your Soundcore headphones are now connected to your iPhone!
Connecting to a Paired iPhone
Once you’ve successfully paired your Soundcore headphones to your iPhone, they will automatically connect whenever the headphones Bluetooth is on and your iPhone’s Bluetooth is on.
To trigger the auto-connect, turn on your headphones and make sure Bluetooth is enabled on your iPhone. Your headphone’s name should appear under the MY Devices paired list. Tap the name to connect if it doesn’t connect automatically.
Your Soundcore headphones will also automatically reconnect to a paired iPhone whenever you turn them on as long as iPhone Bluetooth is active and in range.
If your headphones don’t auto-reconnect, you can manually connect them by going to Settings > Bluetooth > MY Devices and selecting your headphones.
Connecting Multiple Soundcore Headphones to an iPhone
Many Soundcore headphones allow you to store pairing information for multiple devices. This allows you to connect a second pair of Soundcore headphones or earbuds to the same iPhone.
- To pair a second Soundcore headphone to your iPhone:
- Put the new headphones in pairing mode.
- On your iPhone, go to Settings > Bluetooth and tap on the info icon next to your first Soundcore headphone name.
- When you have selected “Connect to Multiple Audio Sources”, tap “Pair New Device” to pair your device.
Select the name of your second Soundcore headphones to connect them.
Now both headphones will be saved in your iPhone Bluetooth MY Devices list. Just toggle between them from the Bluetooth settings when you want to switch headphones.
Disconnecting and Forgetting Soundcore Headphones from an iPhone
When done using your Soundcore headphones with your iPhone, you can disconnect them to save battery life. To disconnect, swipe down from the top right of your iPhone screen and tap the Bluetooth icon to turn it off.
To completely remove the pairing connections between your iPhone and Soundcore headphones:
- Go to Settings > Bluetooth and tap the info icon next to your headphone’s name.
- Tap “Forget This Device” to delete the headphones from your iPhone Bluetooth connections list.
You’ll have to re-pair the headphones next time you want to connect them.
Troubleshooting Soundcore Headphone Connections to an iPhone
If you’re having issues getting your noise cancelling headphones to connect or pair with your iPhone, try these troubleshooting tips:
- Reset your headphones by pressing and holding the power button for 10+ seconds to restart in pairing mode.
- On your iPhone, go to Settings > Bluetooth, tap the info icon next to your headphones, and select “Forget This Device” – then retry pairing.
- Check that your iPhone and headphones have sufficient battery charge.
- Make sure Bluetooth is activated on both devices.
- Bring devices within 30 feet of each other during pairing.
- On your iPhone, go to Settings > General > Reset > Reset Network Settings to reset all Bluetooth connections.
Following the steps outlined in this guide and trying some basic troubleshooting should allow you to successfully connect your Soundcore Bluetooth headphones to your iPhone. Enjoy your new wireless listening experience!
How to connect SoundCore headphones to Bluetooth?
Here are the steps to connect SoundCore headphones to Bluetooth:
Charge your SoundCore headphones fully before pairing.
Turn on the Bluetooth feature on both your headphones and the device you want to connect to (phone, tablet, laptop, etc.). On most SoundCore headphones, you can turn on Bluetooth by pressing and holding the power button for a few seconds until you see the Bluetooth indicator.
Put the headphones in pairing mode by pressing and holding the power button for 5+ seconds until the Bluetooth indicator flashes. Consult your headphone manual for exact pairing steps.
On your connecting device, go to Bluetooth settings and select “Add New Device” or “Pair New Device”.
Your SoundCore headphones name should show up in the available devices list. Select it to initiate pairing.
If prompted, confirm pairing on both your headphones and connecting device. You may hear a tone indicating a successful pairing.
Once paired, your SoundCore headphones will automatically connect with the device each time you turn on Bluetooth on both. Some headphones can store multiple device pairings.
If you have any issues getting your earphones with Bluetooth to connect via Bluetooth, try resetting and re-pairing the devices. Also ensure Bluetooth is activated with sufficient battery, and that your headphones and device are within Bluetooth range of each other. With just a few quick steps, you can get your SoundCore headphones connected via Bluetooth.
Conclusion
Connecting Soundcore headphones to an iPhone is quick and easy. Ensure the headphones are charged and in pairing mode. Activate Bluetooth on the iPhone, select the Soundcore device name to connect, and confirm pairing on both. Once paired, the headphones will automatically reconnect when Bluetooth is on.
Multiple Soundcore headphones can be connected by putting the second pair in pairing mode and selecting “Pair New Device” in the iPhone Bluetooth menu. If facing any issues, resetting devices and Bluetooth connections should help troubleshoot. With just a few simple steps, you can wirelessly connect your Soundcore headphones with an iPhone.
Frequently Asked Questions (FAQs)
How do I put my Soundcore headphones in pairing mode?
Hold the power or Bluetooth button for a few seconds until you see flashing lights or hear a pairing prompt.
Why can’t my iPhone find my Soundcore headphones during pairing?
Ensure headphones are in pairing mode, close to your iPhone, and Bluetooth is enabled. Try restarting headphones if needed.
How do I unpair Soundcore headphones from my iPhone?
In iPhone settings, go to Bluetooth, tap the “i” next to headphones, and select “Forget This Device.”
How do I control music and volume with Soundcore headphones on my iPhone?
Use headphone buttons or touch controls for play/pause, skip tracks, and volume adjustment.
Can I use Siri with Soundcore headphones on my iPhone?
Yes, activate Siri by pressing and holding a designated button on the headphones.
Relevant Guides And Tips
- How to Update Soundcore Q30 Firmware
- Soundcore Liberty Air 2 Right Earbud Not Working: How To Fix
- Anker Soundcore Life q35 vs Soundcore Space q45 Specs
Anneq Aish Choudhary is a passionate writer with a keen interest in headphones and music. With years of experience in writing about technology, Anneq has a deep understanding of the latest trends and innovations in the headphone industry. Anneq’s articles provide valuable insights into the best headphones on the market.