Soundcore Liberty Air 2 Right Earbud Not Working: How To Fix

The Soundcore Liberty Air 2 is a famous wireless earbud with high-quality sound and features. However, some users may experience an issue where the right earbud stops working. This can be caused by various factors, such as low battery, software glitches, or hardware damage. 

This article will explore potential solutions to fix the Soundcore Liberty Air 2 right earbud not working issue.

Reset The Anker Soundcore Earbuds 

You can fix the Soundcore Liberty Air 2 right earbud not working issue by resetting the earbuds. To reset the Anker Soundcore earbuds, please follow the below steps:

Put both earbuds into the charging case and ensure they are correctly seated and charging.

Press and hold the button on the charging case for 10 seconds until the LED indicators on both earbuds start flashing white.

After the LED indicators turn off, remove the earbuds from the charging case.

Turn off the Bluetooth on your device and then turn it on again.

Search for the Anker Soundcore earbuds in the list of available devices and pair them again.

By following these steps, you should be able to reset your Anker Soundcore earbuds and pair them with your device again.

Check The Battery

You can fix the Soundcore Liberty Air 2 right earbud not working issue by checking the battery. “Check the battery” ensures that the Soundcore Liberty Air 2 right earbud has enough power to function correctly. If the earbud is not working, it could be because it has run out of battery.

To check the battery of the earbud, you can follow these steps:

Put the right earbud back in the charging case and ensure it is properly seated and charging.

Close the lid of the charging case and check the LED indicators on the front of the case. The LED indicator for the right earbud should be red if it is charging or green if it is fully charged.

If the LED indicator for the right earbud is red, leave it in the charging case for a while to allow it to charge fully.

After the right earbud is fully charged, remove it from the charging case and see if it works correctly.

Clean The Earbud

You can fix the Soundcore Liberty Air 2 right earbud not working issue by cleaning the earbuds. “Clean the earbud” refers to inspecting the Soundcore Liberty Air 2 right earbud for any dirt, debris, or earwax buildup that may be blocking or obstructing the sound output of the earbud. Any debris or earwax buildup on the earbud may cause the sound to be muffled, distorted, or non-existent.

To clean the earbud, you can follow these steps:

Remove the ear tip from the earbud by gently pulling it off.

Inspect the earbud and the ear tip for any debris or earwax buildup.

If you see any debris or earwax buildup, use a dry cloth or a cotton swab dipped in rubbing alcohol to clean the earbud gently. Be careful not to use too much force or get any liquid inside the earbud.

You can also gently use a soft-bristled toothbrush to remove debris or earwax buildup from the earbud.

Once you have cleaned the earbud, reattach the ear tip and ensure it is securely in place.

Test the earbud to see if it is working correctly.

Check The Bluetooth Connection

You can fix the Soundcore Liberty Air 2 right earbud not working issue by checking the Bluetooth connection. “Check the Bluetooth Connection” refers to ensuring that the Soundcore Liberty Air 2 right earbud is correctly connected to your device via Bluetooth. If the earbud is not working, it could be because it is not correctly connected to your device or there is an issue with the Bluetooth connection.

To check the Bluetooth connection of the earbud, you can follow these steps:

Ensure that Bluetooth is turned on and your device is in pairing mode.

Put both earbuds into the charging case and ensure they are correctly seated and charging.

Take both earbuds out of the charging case and wait for them to connect to each other automatically. You should hear a voice prompt saying “connected” in both earbuds.

After the earbuds are connected, try connecting them to your device by selecting “Soundcore Liberty Air 2” in the list of available Bluetooth devices.

If the right earbud is not working, try turning off Bluetooth on your device and turning it on again. Then, try connecting the earbuds again.

If the right earbud is still not working, try forgetting the Soundcore Liberty Air 2 from your Bluetooth settings and pairing them again.

Once the earbuds are correctly connected, test the right earbud to see if it works properly.

Update The Firmware

You can fix the Soundcore Liberty Air 2 right earbud not working issue by updating the firmware. “Update the firmware” refers to updating the Soundcore Liberty Air 2 right earbud software. Firmware updates can fix bugs, improve performance, and add new features to the earbuds. If the earbud is not working, updating the firmware may help to solve the problem.

To update the firmware of the earbud, you can follow these steps:

Download the Soundcore App from the App Store or Google Play.

Open the Soundcore App and connect your earbuds to your device via Bluetooth.

Check if there is any available firmware update for the earbuds. You can do this by selecting “Device” in the app and then “Firmware Upgrade.”

If there is an available firmware update, follow the instructions in the app to download and install the update. Make sure that your earbuds have enough battery before starting the update process.

During the update process, ensure your earbuds stay connected to your device and do not turn off or disconnect from Bluetooth.

After the firmware update, test the right earbud to see if it works properly.

Contact Soundcore Customer Support

“Contact Soundcore customer support” refers to contacting the official customer support team of Soundcore for assistance with troubleshooting the Soundcore Liberty Air 2 right earbud. 

You can contact Soundcore customer support through their website, email, or phone number, and they can provide you with additional guidance or offer a replacement if necessary. It is a good option if the other troubleshooting steps do not solve the problem.

Check The Case

“Check the Case” refers to ensuring that the charging case of the Soundcore Liberty Air 2 is appropriately functioning and charged. If the charging case is not working correctly or is not charged, the earbuds may not work as expected.

To check the case, you can follow these steps:

Ensure that the charging case is fully charged. You can connect the case to a power source using the provided USB cable.

Check the LED lights on the charging case. Three LED lights on the front of the case should indicate the battery level. If the LED lights are not on, the case may not be adequately charged or defective.

Open the charging case and ensure the earbuds are correctly seated and charging. The LED lights on the earbuds should turn on when they are seated correctly in the case and charging.

If the earbuds are not charging or turning on when seated correctly in the case, try cleaning the charging contacts on the earbuds and inside the charging case with a soft, dry cloth.

Try Best Headphones:

You can also fix the problem by using the best quality headphones. The Soundcore Life P3 and Anker Soundcore Life P3i share many features, including active noise cancellation, transparency mode, and touch controls. However, the Life P3i offers a longer battery life of up to 10 hours compared to the Life P3’s 7-hour battery life.

To learn more, you can read our full article “Soundcore Life p3 vs Anker Soundcore Life p3i Specs” on the two earbuds.

Conclusion

if you’re experiencing issues with the Soundcore Liberty Air 2 right earbud not working, you can take several troubleshooting steps. By checking the battery level, resetting the earbuds, updating the firmware, cleaning them, and inspecting for physical damage, you can resolve the problem. 

If not, reaching out to customer support is a viable option. With these solutions, you can restore the functionality of your earbuds and continue to enjoy their exceptional sound quality.